Category6 Patch Panel
Specification
Meets ANSI/TIA/EIA-568-B.2 Category 6 requirements
Meets TIA/EIA TSB-40
Meets ISO/IEC Generic Cabling Standard 11801:2002 ed.2.0
Meets CENELEC Generic Cabling Standard EN50173 – 1:2002
Meets EN 50173-1 specification
Description
19" standard size for mounting in racks and cabinets
This patch panel is designed for 22-26 AWG solid conductors
Height: 1U (24 ports), 2U (48 ports)
Material
Housing: ABS 94V-0
IDC: PC UL94V-0
PCB: FR-4 1.6 mm (0.06") thick, 2 layers
Contacts: 0.35 mm (0.014") phosphor bronze with 1.27 micron (50
micro inches) gold plated contact area
Metal housing: 1.6 mm (0.06") thick metal
Construction Characteristic
- Modern design and mounting simplicity
- Color marking of conductors according to T568B and T568A
- Numeral marking of ports on the front side of the panel
- Color and numeral marking of IDC modules on the rear side
- IDC Dual contacts provide minimal crosstalk
- 110 type punch down tool is used for cable termination
- LCI Lighting Cable Identification Technology for saving cost and time on cable identification job (LED Patch Panel Only)
- Two LED statuses (Green/Red) for identifying on-line or off-line to check connectivity to active device (LED Patch Panel Only)
Electrical Characteristic
According to UL1863
Current rating: 1.5A Max.
Voltage rating: 150V
Contact Resistance: 20MΩ
Insulation Resistance: 500MΩ
Dielectric Withstand Voltage: 1000V AC RMS, 60Hz/1min
Ordering Information
PP06-UL-24
i-Net Networks Patch Panel Category6 Unshielded LED Dual IDC 24 Port
UL
UL—Unshielded LED Dual IDC, US—Unshielded Std. Dual IDC, SS—Shielded Std. Dual IDC,
KU—Keystone Unloaded,KL—Keystone Loaded
KU—Keystone Unloaded,KL—Keystone Loaded
24
24—24 Port, 48—48 Port
