Category5e UTP Solid Jumper Cable
Specification
Meets ANSI/EIA/TIA 568-B.2 requirements
Meets general purpose cable UL-1581 CM rating
Description
Unshielded Copper cable, 2 pairs, category 5, solid
Cable is used for indoor installation
Material
Conductive material: wire made of soft annealed electrolytic copper
Conductor insulation: HDPE
The cable jacket: PVC (polyvinyl chloride)
Meets ANSI/EIA/TIA 568-B.2 requirements
Meets general purpose cable UL-1581 CM rating
Description
Unshielded Copper cable, 2 pairs, category 5, solid
Cable is used for indoor installation
Material
Conductive material: wire made of soft annealed electrolytic copper
Conductor insulation: HDPE
The cable jacket: PVC (polyvinyl chloride)
Technical Characteristic
Conductor diameter: 0.51 mm (0.02") (24 AWG)
Insulated conductor diameter: 0.92 ± 0.2 mm (0.036" ± 0.008")
Outer cable diameter: 4.6 ± 0.2 mm (0.18" ± 0.008")
Jacket thickness: 0.4 mm (0.0157")
Minimum bend radius: 4xØ
Conductor elongation: 14% minimum
Rip cord has a breaking strength of 10 kg (98 N)
Conductor diameter: 0.51 mm (0.02") (24 AWG)
Insulated conductor diameter: 0.92 ± 0.2 mm (0.036" ± 0.008")
Outer cable diameter: 4.6 ± 0.2 mm (0.18" ± 0.008")
Jacket thickness: 0.4 mm (0.0157")
Minimum bend radius: 4xØ
Conductor elongation: 14% minimum
Rip cord has a breaking strength of 10 kg (98 N)
| Conductor resistance at 20°C (68°F) | 9.38Ω/100m (2.9Ω/100ft) | |
| DC Resistance Unbalance | 5% | |
| Pair-to-Ground Capacitance Unbalance | 330pF/100m (101pF/100ft) | |
| Impedance 0.772-100 MHz | 85Ω-115Ω | |
| Mutual Capacitance | 5.6nF/m (1.7nF/ft) | |
| Spark Test | 2.5kV |
Ordering Information
HJ5ES-1
i-Net Networks Jumper Cable Category5e UTP Solid 24AWG 1 Pair (w/o Jacket)
